IMEI नंबर देखने के लिए
कोड : *#06#
फोन और बैटरी की सारी जानकारी देखने के लिए
कोड : *#*#4636#*#*
फैक्ट्री डेटा रीसेट करने के लिए
कोड : *#*#7780#*#*
फोन को फुल फार्मेट करने के लिए
कोड : *2767*3855#
जीटॉक सर्विस स्क्रीन में देखने के लिए
कोड : *#*#8255#*#*
कैमरा सेटिंग करने के लिए
कोड : *#*#34971539#*#*
कॉल को इंड करने के लिए
कोड : *#*#7594#*#*
फोन का बैकप लेने के लिए
कोड : *#*#273283*255*663282*#*#*
जीपीएस टेस्टिंग करने के लिए
कोड : *#*#232331#*#*
ब्लूटूथ टेस्ट करने के लिए
कोड : *#*#232337#*#*
~The code *#*#4636#*#* shows the following information about your
phone and battery: * Phone information * Battery information * Battery
history * Usage statistics
~The *#*#7780#*#* performs a factory data reset, and will remove the following: * Google account settings stored in your phone * System and application data and settings * Downloaded applications It will not remove: * Current system software and bundled applications * SD card files e.g. photos, music files, etc. This one asks for a confirmation, so if you doget a chance to change your mind.
~This *2767*3855# codeis used for factory format,and will remove all files and settings including the internal memory storage. It will also reinstall the firmware. Don’t try this one unless you’re sure. PS: Once you give this code, there is no way tocancel the operation unless you remove the battery from the phone, and even then, you run the risk of bricking your phone.
~This *#*#34971539#*#* code is used to get information about the camera. It shows following 4 menus: * Update camera firmware in image (Don’ttry this option) * Update camera firmware in SD card * Get camera firmware version * Get firmware update count WARNING: Never use thefirst option otherwise yourphone camera may stop working, and there is really no reason to update the camera firmware anyway.
~This *#*#7594#*#* code will change the “End Call / Power” button action on your phone. By default, if youlong press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Poweroff. You can change this action using this code. You can enable direct power off on this button so you don’t need to waste your time in selecting the option.
~This *#*#273283*255*663282*#*#* code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
~This *#*#197328640#*#* code can be used to enter into Service mode. You can run various testsand change settings in the service mode.
~WLAN, GPS and Bluetooth Test Codes: *#*#232339#*#* OR*#*#526#*#* OR*#*#528#*#* – WLAN test (Use “Menu”button to start various tests) *#*#232338#*#* – Shows WiFi MAC address *#*#1472365#*#* – GPS test *#*#1575#*#* – Another GPS test *#*#232331#*#* – Bluetooth test *#*#232337#*# – Shows Bluetooth device address
~This *#*#8255#*#* code can be used to launch GTalk Service Monitor.
~Codes to launch variousFactory Tests: *#*#0283#*#* – Packet Loopback *#*#0*#*#* – LCD test *#*#0673#*#* OR*#*#0289#*#* – Melody test *#*#0842#*#* – Device test (Vibration test and BackLight test) *#*#2663#*#* – Touch screen version *#*#2664#*#* – Touch screen test *#*#0588#*#* – Proximity sensor test *#*#3264#*#* – RAM version
~Codes to get Firmware version information: *#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate *#*#1234#*#* – PDAand Phone *#*#1111#*#* – FTA SW Version *#*#2222#*#* – FTAHW Version *#*#44336#*#* - PDA, Phone, CSC, BuildTime, Changelist number You should be careful when using some of these codes. Once you apply them, they can notbe undone. For exp restore factory settings.
~The *#*#7780#*#* performs a factory data reset, and will remove the following: * Google account settings stored in your phone * System and application data and settings * Downloaded applications It will not remove: * Current system software and bundled applications * SD card files e.g. photos, music files, etc. This one asks for a confirmation, so if you doget a chance to change your mind.
~This *2767*3855# codeis used for factory format,and will remove all files and settings including the internal memory storage. It will also reinstall the firmware. Don’t try this one unless you’re sure. PS: Once you give this code, there is no way tocancel the operation unless you remove the battery from the phone, and even then, you run the risk of bricking your phone.
~This *#*#34971539#*#* code is used to get information about the camera. It shows following 4 menus: * Update camera firmware in image (Don’ttry this option) * Update camera firmware in SD card * Get camera firmware version * Get firmware update count WARNING: Never use thefirst option otherwise yourphone camera may stop working, and there is really no reason to update the camera firmware anyway.
~This *#*#7594#*#* code will change the “End Call / Power” button action on your phone. By default, if youlong press the button, it shows a screen asking you to select any option from Silent mode, Airplane mode and Poweroff. You can change this action using this code. You can enable direct power off on this button so you don’t need to waste your time in selecting the option.
~This *#*#273283*255*663282*#*#* code opens a File copy screen where you can backup your media files e.g. Images, Sound, Video and Voice memo.
~This *#*#197328640#*#* code can be used to enter into Service mode. You can run various testsand change settings in the service mode.
~WLAN, GPS and Bluetooth Test Codes: *#*#232339#*#* OR*#*#526#*#* OR*#*#528#*#* – WLAN test (Use “Menu”button to start various tests) *#*#232338#*#* – Shows WiFi MAC address *#*#1472365#*#* – GPS test *#*#1575#*#* – Another GPS test *#*#232331#*#* – Bluetooth test *#*#232337#*# – Shows Bluetooth device address
~This *#*#8255#*#* code can be used to launch GTalk Service Monitor.
~Codes to launch variousFactory Tests: *#*#0283#*#* – Packet Loopback *#*#0*#*#* – LCD test *#*#0673#*#* OR*#*#0289#*#* – Melody test *#*#0842#*#* – Device test (Vibration test and BackLight test) *#*#2663#*#* – Touch screen version *#*#2664#*#* – Touch screen test *#*#0588#*#* – Proximity sensor test *#*#3264#*#* – RAM version
~Codes to get Firmware version information: *#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate *#*#1234#*#* – PDAand Phone *#*#1111#*#* – FTA SW Version *#*#2222#*#* – FTAHW Version *#*#44336#*#* - PDA, Phone, CSC, BuildTime, Changelist number You should be careful when using some of these codes. Once you apply them, they can notbe undone. For exp restore factory settings.
